Huawei USG6000E Series Hardware Manual page 520

HUAWEI USG6000E Series
Hardware Guide
Figure 5-2 Installing the mounting ears on the chassis
Step 2 Install floating nuts.
Figure 5-3
Figure 5-3 Positions of floating nuts
Use M6 screws to fix the floating nuts at the positions specified in
shown in
Issue 08 (2022-04-20)
NO TE
If the tray installation mode is used, skip this step.
illustrates the positions of floating nuts.
Figure 5-4.
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Installation
Figure 5-3, as
513