Huawei USG6000E Series Hardware Manual page 106

HUAWEI USG6000E Series
Hardware Guide
Port
MGMT port
Power Supply System
The power supply system has one PAC60S12-AR, PAC60S12-R, or PAC600S12-CB
AC power module. Two power modules can be configured for 1+1 power
redundancy.
Heat Dissipation System
The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air flow. The
fan module locates at the air exhaust of the system.
Issue 08 (2022-04-20)
Connector Type
RJ45
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
Description
Out-of-band
10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.
Available
Components
Ethernet Cable
99