Huawei USG6000E Series Hardware Manual page 480

HUAWEI USG6000E Series
Hardware Guide
Technical Specifications
Table 4-302 Technical specifications of the PGND Cable
Descriptio
n
Power
Cable,0.4m,
4mm^2,OT
6-4,227IEC
02-4^2G&Y
,OT6-6
Power
Cable,
4m,OT2-16
-8,H07Z-
K-16^2G&Y
,OT16-6,LS
ZH
4.6.2 AC Power Cable
4.6.2.1 AC Power Cable
Connection
An AC power cable is connected as follows:
●
●
Use a single-phase 3-line electrical outlet that has been properly grounded. The
grounding point of the power supply must be reliably grounded in the building.
Generally, the grounding point of the power supply system of the building has
been buried in the grounding during the construction and wiring of the building.
Make sure that the power system of the building has been grounded before you
connect the USG with AC power cables.
Issue 08 (2022-04-20)
Part
Number
04150617
04152748-
001
The C7 straight female or C13 straight female connector is connected to the
AC power socket of the USG.
The PI straight male, PB straight male, PD angle male, or PG angle male
connector is connected to an external power source.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
Model Connector
X1
IEC401 14170017:
OT2-16-8
- OT2-16-8
4 Hardware Overview
Connector Cable
X2 length
14170023: 0.4 m
OT6-6
OT16-6 0.85 m
473