Table of Contents
Advertisement
HUAWEI USG6000E Series
Hardware Guide
●
●
Issue 08 (2022-04-20)
The procedure for inserting and removing LC/PC connectors is as follows:
–
Insert and remove the connector along the axis without rotating the
connector.
–
When you insert the fiber, carefully insert the fiber head into the optical
interface on the interface board.
–
To remove the optical fiber, squeeze the pinch on the fiber connector,
gently push on the fiber connector, and then pull it out.
SC/PC connector
The procedure for inserting and removing SC/PC connectors is as follows:
–
Insert and remove the connector along the axis without rotating the
connector.
–
When you insert the fiber, carefully insert the fiber head into the optical
interface on the interface board.
–
To remove the optical fiber, gently push on the fiber connector, and then
pull out the connector.
FC/PC connector
The procedure for inserting and removing FC/PC connectors is as follows:
–
When you insert an optical fiber, aim the FC/PC connector at the optical
interface on the interface board to avoid damaging the inner layer of the
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
498
Hide quick links:
Advertisement
Table of Contents
