Huawei USG6000E Series Hardware Manual page 320

HUAWEI USG6000E Series
Hardware Guide
Port
40GE optical ports
(0 to 3)
HA ports(0 to 1)
USB 3.0 port
Issue 08 (2022-04-20)
Connector Type
QSFP+
SFP+
USB 3.0 Type A
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
Description
Four 40GE
Ethernet optical
ports, numbered
from 40GE0/0/0
to 40GE0/0/3.
By default, the
40GE0/0/2 to
40GE0/0/3 optical
ports mode are
disabled. To
enable this mode,
run the set device
port-config-mode
40g-port enable
command.
Heartbeat
interfaces for hot
standby or the
cluster. Two
devices are
connected
through
independent links
to form hot
standby or the
cluster. numbered
from HA0/0/0 to
HA0/0/1.
USB ports allow
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.
Available
Components
40 Gbps QSFP+
Optical Module
10Gbps SFP+
Optical Modules
● USB flash drive
that complies
with USB 2.0
● USB flash drive
that complies
with USB 3.0
313