Huawei USG6000E Series Hardware Manual page 445

HUAWEI USG6000E Series
Hardware Guide
Item
Minimum Tx optical power [dBm]
Minimum extinction ratio [dB]
Receiver Optical Characteristics
Rx sensitivity (AVG) [dBm]
Overload power (AVG) [dBm]
NOTE
4.5.2.5 SFP-FE-SX-MM1310
Table 4-262 SFP-FE-SX-MM1310 specifications
Item
Basic Information
Module name
Part Number
Model
Form factor
Application standard
Connector type
Optical fiber type
Working case temperature [°C(°F)]
Transmission rate [bit/s]
Target transmission distance [km]
Transmitter Optical Characteristics
Center wavelength [nm]
Maximum Tx optical power [dBm]
Minimum Tx optical power [dBm]
Minimum extinction ratio [dB]
Receiver Optical Characteristics
Issue 08 (2022-04-20)
BIDI optical modules must be used in pairs. For example, SFP-FE-LX-SM1550-BIDI must be
used with SFP-FE-LX-SM1310-BIDI.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
Value
-15 dBm
8.5 dB
-32 dBm
-8 dBm
Value
SFP-FE-SX-MM1310
02315233
SFP-FE-SX-MM1310
SFP
100BASE-FX
LC
MMF
0°C to 70°C (32°F to 158°F)
100 Mbit/s
Multimode fiber (50 μm or 62.5 μm
diameter): 2 km
1310 nm
-14.0 dBm
-19.0 dBm
10 dB
438