Huawei USG6000E Series Hardware Manual page 155

HUAWEI USG6000E Series
Hardware Guide
Name
Fixed interface area
Protective ground
terminal
MAC label
SN label
Fan module
Power module
Indicators and Buttons
Figure 4-61 Indicators and buttons on the USG6580E
1. PWR, SYS,
USB, HA, WAN
and CLOUD
indicators
6. MGMT port
indicator
Issue 08 (2022-04-20)
Description
Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.
Connects the M4 OT terminal of a PGND cable to the
cabinet or the ground bar in the equipment room.
Uniquely identifies the MAC address of the device,
which is required during network forwarding
configuration.
Uniquely identifies the device, which needs to be
provided for the local technical support personnel to
apply for a license.
Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
2. GE electrical
port ACT
indicator
7. RST button
Copyright © Huawei Technologies Co., Ltd.
3. GE electrical 4. Optical port
port LINK ACT indicator
indicator
- -
4 Hardware Overview
5. Optical port
LINK indicator
-
148