Huawei USG6000E Series Hardware Manual page 286

HUAWEI USG6000E Series
Hardware Guide
Name
MAC label
SN label
Fan module
Power module
Indicators and Buttons
Figure 4-115 Indicators and buttons on the USG6650E
1. PWR, SYS,
USB, HA, WAN
and CLOUD
indicators
5. 40GE optical
port indicator
Issue 08 (2022-04-20)
Description
Uniquely identifies the MAC address of the device,
which is required during network forwarding
configuration.
Uniquely identifies the device, which needs to be
provided for the local technical support personnel to
apply for a license.
The fan module provides air flow for heat dissipation.
The power module supports hot-swapping and can be
replaced without interrupting device operation.
However, to prevent overheating, do not operate the
device without a functioning fan module for more than
one minute.
Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
2. OFL
indicator
NOTE
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.
6. MGMT port
indicator
Copyright © Huawei Technologies Co., Ltd.
2. GE electrical 3. 10GE optical
port indicator port ACT
indicator
7. RST button 8. OFL button
4 Hardware Overview
4. 10GE optical
port LINK
indicator
-
279