Huawei USG6000E Series Hardware Manual page 544

HUAWEI USG6000E Series
Hardware Guide
Use a Phillips screwdriver to fix the mounting ears to both sides of the chassis
with M4 screws. The maximum torque is 1.4 N m. For details about how to install
the mounting ears, see the installation methods in
● The front mounting brackets, rear mounting brackets, and rear mounting bracket guide rails
● To ensure sufficient cabling space, reserve at least 130 mm of vertical distance from the
● After the installation is complete, the rear mounting brackets and rear mounting bracket
Table 5-4 Installation of front and rear mounting ears
Distance Between
Front and Rear
Mounting Rails
310 mm to 351 mm
369 mm to 410 mm
Issue 08 (2022-04-20)
NO TE
must be installed on both sides of the USG.
Install them on the other side in the same way.
USG's port side to the interior side of the cabinet door.
guide rails will not block cables routed from the ports or touch the cabinet door.
Copyright © Huawei Technologies Co., Ltd.
Table 5-4
Installation of Front Mounting Brackets, Rear
Mounting Brackets, and Rear Mounting Bracket
Guide Rails
5 Hardware Installation
Table 5-4.
shows the installation on one side.
537