Huawei USG6000E Series Hardware Manual page 539

HUAWEI USG6000E Series
Hardware Guide
----End
Follow-up Procedure
Verify the following after the connection is complete:
●
●
5.3.8 Powering On or Off the USG6510E, USG6510E-POE,
USG6530E
This section describes how to power on or off the USG6510E, USG6510E-POE,
USG6530E. To ensure the normal start and security of the USG6510E, USG6510E-
POE, USG6530E, strictly follow the operation guide to power on or off the
USG6510E, USG6510E-POE, USG6530E.
Context
Before you power on the USG, ensure that:
●
●
Issue 08 (2022-04-20)
Figure 5-18 Connecting a power adapter to the (USG6510E-POE)
The power cable is firmly connected to the power supply socket.
If multiple USGs are deployed, the power cables of each USG are correctly
labeled for distinction.
The power cable and PGND cable are properly connected.
The power switch in the equipment room is easy to locate so that you can
power off devices in the case of accidents.
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Installation
532