Chapter 3 Function - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

3
FUNCTION
This chapter explains the functions of this product.
Always read the instructions before using the equipment.
 Connecting the USB power supply / 24 V external power supply
 Applicable models
• FR-E800 series
 Functions available during USB power delivery / 24 V external power supply operation
• Only the following functions operate normally when power is supplied to the FR-E800 inverter from the USB port or a 24
V external power supply.
Parameter list function
Safety parameter setting
Convert
Batch monitor function
I/O terminal monitor
Diagnostic function
PLC function
USB memory parameter copy file edit
Ethernet parameter setting function
Help
○: Available ×: Not available
 Precautions
• Option information cannot be recognized automatically by automatic recognition in the system setting window.
• The AI fault diagnosis and main circuit capacitor life diagnosis are not available.
• Serial numbers cannot be displayed using the serial number function.
• Diagnosis result output is not available for the I/O monitor function, faults history function, serial number function, and life
check function.
• The inverter is reset when power source is changed from the main circuit power supply to the USB power supply, or from
the USB power supply or the 24 V external power supply to the main circuit power supply. A timeout error may occur
depending on the types of functions being activated.
 Precautions only for USB power delivery
• Ethernet communication is not guaranteed.
• Note that Ethernet communication may be disabled in the FR-E800-(SC)E inverter when turning ON/OFF the main circuit
power supply is repeated while Ethernet and USB connections are used at the same time. Disconnect the USB cable
before turning ON/OFF the main circuit power supply.
98
3. FUNCTION
Function
Parameter list
Motor setting
Analog input terminal
calibration
Output terminal
calibration
Trace setting
Settings by function
Input terminal
assignment
Output terminal
assignment
Point table
Unit selection
Fault history function
Serial number function
Life check
Online status display
USB power 24 V external power
delivery supply operation
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
× ○
× ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○