Safety Parameter Setting - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

3.2

Safety parameter setting

The safety parameter setting function is available for the following models.
Model: FR-E800-SCE
The following functions can be performed using the "Safety parameter setting".
• Safety parameter display
• Safety parameter setting value batch read
• Safety parameter setting value batch write
• Safety parameter clear
• Safety parameter verification
• Safety parameter search
To display "Safety parameter setting", on the menu bar select [Safety] > [Safety parameter setting]. Safety parameters will be
displayed. Safety parameters cannot be displayed if no project has been created, or if no project file is open. The available
"Safety parameter setting" functions are different at online and offline.
Function
Safety parameter clear
Batch read
Batch write
Verify
Safety parameter setting
value input
Undo
Redo
Search
(○: operation available; ×: operation not available)
NOTE
• FR Configurator2 initially shows the parameters of the latest inverter at the time of the FR Configurator2 upgrade. Use the
newest version of FR Configurator2 to perform the safety parameter batch read and batch write.
• The setting range, initial value, and number of safety parameters may be different with the inverter before upgrading (additional
functions).
• Although the safety parameter name of the Instruction Manual and the safety parameter name of FR Configurator2 may be
different, there is no difference in the safety parameter function.
114
3. FUNCTION
3.2 Safety parameter setting
Online Offline
○ ×
○ ×
○ ×
○ ○
○ ○
○ ○
○ ○
○ ○