Convert; Schematic Illustration Of The Convert Function - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

3.3

Convert

Parameter settings of the conventional models can be copied to the 800 series parameter settings in the "Convert" window. To
display the "Convert" window, select [Convert...] in the [Parameter] menu.
• Models compatible with the convert function
Source inverter
FR-A500(L)
FR-A700
FR-B(A700)
FR-B3-(N)(H)(A700)
FR-F700(P)
FR-E700(-NE)
NOTE
• Although the parameter name described in the Instruction Manual of the inverter and the parameter name used in FR
Configurator2 may be different, there is no difference in the parameter function.
• If an option non-compatible with the target inverter is connected to the source inverter, if a unit for setting a parameter is fixed
by the option while Pr.37 Speed display and Pr.144 Speed setting switchover of the source inverter are set to change the
unit, the setting of the source inverter is copied unchanged to the target inverter.
• When the source inverter supports multiple ratings, the larger capacity inverter must be used as a target inverter depending
on the multiple rating setting (Pr.570).
3.3.1

Schematic illustration of the convert function

120
3. FUNCTION

3.3 Convert

Target inverter
FR-A800(-E)
FR-A800(-E)
FR-B
FR-B3-(N)(H)
FR-F800(-E)
FR-E800(-E/-SCE)
Source
Parameter file
(∗.pr4, ∗.pr3, ∗.prm) 1)
Inverter
2)
Target
Parameter file
3)
(∗.pr4)
Convert
4) Reflect to the parameter list