3.2.5
Safety parameter verification
This function accesses the inverter safety parameters, and verifies the safety parameter setting values set by FR Configurator2
with the values selected in the verify destination window.
The "Select destination selection" window can be displayed by selecting [Verify...] from the [Safety parameter setting (Z)] menu
bar, or by selecting [Verify] on the toolbar.
Symbol
A
Destination
B
OK
C
Cancel
The Verify window appears after selecting the destination on the Verify destination window.
Symbol
Name
St. No. (Station
A
number)
B
Verify list
3.2.6
Configuration signature
The safety parameter setting function is available for the following models.
Model: CIP Safety model
The Safety Configuration ID (SCID) read from the inverter is displayed.
118
3. FUNCTION
3.2 Safety parameter setting
A
Name
Initial value
Inverter
File
Shows the Verify window.
Closes the Verify destination selection window without performing verification.
A
B
Shows the verified station number.
Shows parameters whose verified values are mismatched.
B
C
Function/description
Verifies against the initial value.
Verifies against parameter setting values written to the inverter.
Verifies against parameter list setting values saved to a file (*.spr4).
Function/description