Graph Measurement Procedure Example (Monitoring Output Frequency, Terminal Run, And Terminal Fu) - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

The "History management" window will be displayed by selecting [History management...] from the [Graph (Z)] menu while the
graph window is displayed, or by clicking
Symbol Name
A Delete
B Delete all
C History list
NOTE
• When continuously sampling, all acquired data will be added sequentially to the history, and the next sampling will be
performed.
• When display is several graphs, cursor functions are available only for the currently displayed graph.
• The unit (unit symbol) used for the latest sampling is indicated as the unit of the sampling data. Take care when changing the
unit.
3.4.8 Graph measurement procedure example
(monitoring output frequency, terminal RUN, and
terminal FU)
 Measurement without a trigger
1.
Specify the station number to be measured as the "Tgt. St." (Target station). Next, select "Output frequency" for the
"Analog 1" column of "Wave", "RUN" for "Digital 1", and "FU" for "Digital 2".
144
3. FUNCTION
3.4 Graph
on the toolbar.
C
Function/description
Deletes the selected history.
Deletes all records. However, protected records will not be deleted.
History Records are displayed in ascending order by number from the newest to the oldest. Up to
number 20 records can be saved.
Measurement
Shows the date and time when sampling was executed.
date and time
Memo A field for comments.
Prevents the checked records from being deleted by the delete button or by continuous
Protection sampling.
Up to 10 records can be protected.
Select "FU".
A B
Select the station to be measured.
Select "Output frequency".
Select "RUN".