2.
The sampling interval can be set for "measurement interval", and the sampling time can be set for "Time".
3.
Measurement will start by clicking [
4.
Measurement is finished by clicking [
5.
The graph display can be adjusted.
6.
Data can be saved to a file by "Save as" (refer to
Measurement with a trigger
Trigger data: Digital CH1
1.
Specify the station number to be measured as the "Tgt. St." (Target station). Next, select "Output frequency" for the
"Analog 1" column of "Wave", "RUN" for "Digital 1", and "FU" for "Digital 2".
Start].
Stop], or when the set sampling time is elapsed.
Move up/down the waveform.
Select "FU".
Set the sampling interval.
Set the sampling time.
Select "
Start".
Select "
Stop".
Moves up/down the
digital waveform.
Changes the displayed
position of the vertical
axis scale.
page
93).
Select the station to be measured.
Select "Output frequency".
Select "RUN".
1
2
3
4
5
6
7
8
9
10
145
3. FUNCTION
3.4 Graph