Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 108

 Acceleration/deceleration pattern and time setting
Set parameters related to acceleration/deceleration.
A
C
Symbol Name
A Set frequency
B Constant-speed time
Acceleration/deceleration
C
pattern
Acceleration/deceleration
D
time increments
E Parameter list
 Encoder option selection (Pr.862 = "10 or 11")
When Pr.862 = "10 or 11", position control and PM motor vector control are disabled. The following functions are enabled
instead.
Function disabled
Vector control with encoder (induction motor, position
control)
Vector control with encoder (PM motor, speed control)
Vector control with encoder (PM motor, position control)
Set an output frequency target value for the graph.
Set the constant-speed operation time for the graph.
Select the acceleration/deceleration pattern. Several patterns are available for selection
depending on the inverter model. (Refer to Pr.29.)
Select the increment for the acceleration/deceleration time. (Refer to Pr.21.)
Change the setting (value) of the selected parameter.
Vector control with encoder (induction motor, position control)
PM sensorless vector control (PM motor, speed control)
PM sensorless vector control (PM motor, speed control)
B
D
E
Function/description
Functions enabled instead
1
2
3
4
5
6
7
8
9
10
107
3. FUNCTION
3.1 Parameter list