Installation And Uninstallation; Installation Of Fr Configurator2 - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

1.3

Installation and uninstallation

1.3.1

Installation of FR Configurator2

To use FR Configurator2, the files included on the setup disk (DVD) or the downloaded file must be installed onto the personal
computer.
Check the following points before the installation.
• Close any other applications that have already been running.
• For the installation, log on as an administrator (Administrator account) and start installation.
• If an inverter is connected by the USB cable, disconnect the USB cable.
• Installation files are compressed. Copying the files does not start FR Configurator2 yet. Install the software using the setup
program.
• To install the software, follow the installation procedure in Windows screen.
• In an operation system with antivirus/security software, a warning may appear when installing FR Configurator2. If a
warning appears, permit the installation of FR Configurator2 according to the setting procedure of your antivirus/security
software.
 Installation procedure
The following section describes the procedures of installing FR Configurator2.
1.
Insert the DVD to an available DVD drive. Installation starts automatically.
NOTE
• Installation can be started by double-clicking the icon of DVD drive or the following procedure.
1) Choose the [Run...] command from [Start] menu.
2) "Run" window appears.
3) Type "D:\SETUP" (with one-byte characters) in "Open" field and click [OK]. (When DVD drive is D drive.)
• The following dialog may appear during the installation. Click "Yes".
2.
The following window will be displayed. Click [Next>].
22
1. OUTLINE
1.3 Installation and uninstallation
Click "Yes"