Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 125

6.
Select [Reflect...] in the "Convert" window to display the "Reflect" window.
To save the setting to a file
Select [Save in file]. Specify the destination to save the file and click [OK]. The converted parameter setting is saved
in the parameter file (*.pr4).
To reflect the setting to the project
Select [Reflect to project]. Specify the station to reflect the setting and click [OK]. The converted parameter setting
is reflected to the project.
 To convert from a parameter file (*.pr4, *.pr3, *.prm)
1.
Check the online condition between FR Configurator2 and the inverter. (Click
condition to online.)
2.
Select [Specify source] in the "Convert" window to display the "Source" window.
3.
Specify the source parameter file (*.pr4, *.pr3, *.prm). Click [OK] to reflect the parameter settings of the source file
in the source parameter list in the convert window.
4.
The setting can be changed for some parameters of the source inverter. To change the parameter setting value,
enter the desired value in the setting value field. After the parameters of the source inverter are displayed in the list,
the [Convert...] button in the "Convert" window will be active. Select [Convert...] to display the "Convert" sub window.
124
3. FUNCTION
3.3 Convert
Specify the destination
to save the file
on the menu bar to switch the
Select [Specify source]
Select [Convert...]