Suzuki XL7 2007 Service Manual page 779

12. Disconnect the transmission cooler lines from the
radiator.
13. Unclip the transmission cooler lines from the fan
assembly.
14. Remove the fan assembly bolts from the radiator.
15. Remove the fan assembly from the radiator.
16. Position the condenser and radiator assembly
forward of the right hand front impact bar bracket.
17. Remove the fan assembly from the vehicle.
Engine Cooling System:
Installation Procedure
1. Install the fan assembly to the vehicle.
2. Return the condenser and radiator assembly to the
mounted position.
3. Install the fan assembly to the radiator by guiding the
lower tabs into the corresponding hooks on the
radiator.
CAUTION
!
Refer to "Fastener Notice: ".
4. Install the fan assembly bolts to the radiator.
Tightening torque
Tighten the bolts to 9 N⋅m (80 lb in).
5. Install the radiator inlet hose to the radiator (2).
6. Install the radiator inlet hose clamp to the radiator
(1).
1F-36