WARNING
!
Refer to "Fuel and Evaporative Emission
Hose/Pipe Connection Cleaning Notice: ".
WARNING
!
Refer to "Safety Glasses Caution: ".
3. Blow dirt out of the fitting using compressed air.
4. Choose the correct tool from the J 37088-A for the
size of the fitting. Insert the tool into the female
connector, then push inward in order to release the
locking tabs.
WARNING
!
Refer to "Relieving Fuel Pressure Caution".
5. Pull the connection apart.
6. Use a clean shop towel in order to wipe off the male
pipe end.
7. Inspect both ends of the fitting for dirt and burrs.
Clean or replace the components as required.
Installation Procedure
WARNING
!
Refer to "Fuel Pipe Fitting Caution".
1. Apply a few drops of clean engine oil to the male
pipe end.
Fuel System:
1G-35