1D-224 Engine Mechanical:
NOTE
All chips must be removed from the tapped
hole prior to insert installation.
6. Using compressed air, clean out any chips.
7. Spray cleaner GM P/N 12346139, GM P/N
12377981 (Canadian P/N 10953463) or equivalent
into the tapped hole.
NOTE
All chips must be removed from the tapped
hole prior to insert installation.
8. Using compressed air, clean out any chips.
NOTE
Do not allow oil or other foreign material to
contact the outside diameter (OD) of the
insert.
9. Lubricate the threads of the driver installation tool (2)
with the J 42385-110 (1).