Cylinder Head Removal - Right Side; Crankshaft Rear Oil Seal And Housing Removal - Suzuki XL7 2007 Service Manual

Hide thumbs Also See for XL7 2007:

Table of Contents

1D-158 Engine Mechanical:

Cylinder Head Removal - Right Side

Reference: "Valve Lifter Removal - Right Side: ".

1. Remove the right cylinder head bolts.

2. Remove the right cylinder head.

3. Remove and discard the right cylinder head gasket.

Reference: "Cylinder Head Disassemble: ".

Crankshaft Rear Oil Seal and Housing

Reference: "Oil Pump Removal: ".

1. Remove the crankshaft rear oil seal housing bolts.

2. Using the pry points located at the edge of the

crankshaft rear oil seal housing shear the RTV