Left Secondary Timing Chain Tensioner - Suzuki XL7 2007 Service Manual

Jc636
Hide thumbs Also See for XL7 2007:
Table of Contents

Advertisement

Left Secondary Timing Chain Tensioner

1. Inspect the left secondary timing chain tensioner for
damaged plunger-to-shoe contact surface (1).
2. Inspect the left secondary timing chain tensioner for
locked or binding timing chain tensioner. Reset the
plunger (3) and ensure the plunger moves freely (2)
in and out of the body of the tensioner. Refer to
"Secondary Camshaft Drive Chain Tensioner
Installation - Left Side (Third Design)" "Secondary
Camshaft Drive Chain Tensioner Installation - Left
Side (Fourth Design)".
3. Replace a damaged left secondary timing chain
tensioner.
Right Secondary Timing Chain Tensioner
1. Inspect the right secondary timing chain tensioner
for damaged plunger-to-shoe contact surface (1).
2. Inspect the right secondary timing chain tensioner
for locked or binding timing chain tensioner. Reset
the plunger (3) and ensure the plunger moves freely
(2) in and out of the body of the tensioner. Refer to
"Secondary Camshaft Drive Chain Tensioner
Installation - Right Side (Third Design)" "Secondary
Camshaft Drive Chain Tensioner Installation - Right
Side (Fourth Design)".
3. Replace a damaged right secondary timing chain
tensioner.
Reference: "Camshaft Position Actuator Installation -
Right Side Intake (Third Design): ".
Camshaft Timing Drive Components
Cleaning and Inspection (Fourth Design)
Reference: "Camshaft Position Actuator Removal - Right
Side Intake (Fourth Design): ".
Cleaning Procedure
1. Clean all the following components with solvent:
– Crankshaft sprocket
– Primary timing drive chain
– Primary timing drive chain shoe
– Primary timing drive chain guides
– Primary timing drive chain tensioner
– Secondary timing drive chains
– Secondary timing drive chain shoes
– Secondary timing drive chain guides
– Secondary timing drive chain tensioners
– Timing component fastening bolts
2. Clean each camshaft position actuator's exterior with
solvent.
WARNING
!
Refer to "Safety Glasses Caution: ".
3. Dry the timing components with compressed air.
Engine Mechanical:
1D-197

Advertisement

Table of Contents
loading

Table of Contents