Upper To Lower Intake Manifold Disassemble Procedure - Suzuki XL7 2007 Service Manual

Hide thumbs Also See for XL7 2007:

Table of Contents

The camshaft cover bolt grommet must be

installed into the camshaft cover bolt hole

before installing the camshaft cover bolt.

3. Install the NEW right camshaft cover bolt grommets.

Reference: "Camshaft Cover Installation - Left Side: ".

Reference: "Camshaft Cover Installation - Right Side: ".

Intake Manifold Disassemble

Reference: "Intake Manifold Removal: ".

Upper to Lower Intake Manifold Disassemble

Do not reuse the upper-to-lower intake

manifold gasket and the intake manifold-to-

cylinder head sealing gaskets.

1. Remove the upper-to-lower intake manifold bolts.

2. Remove the upper intake manifold from the lower

intake manifold.

3. Remove and discard the upper-to-lower intake

manifold gaskets.

Engine Mechanical:

Troubleshooting