Engine Coolant Temperature Sensor
Replacement
Removal Procedure
1. Disconnect the engine wiring harness electrical
connector (4) from the engine coolant temperature
(ECT) sensor.
2. Remove the ECT sensor.
Repair Instructions
Installation Procedure
!
Refer to "Fastener Notice: ".
1. Install the ECT sensor.
Tightening torque
Tighten the sensor to 22 N⋅m (16 lb ft).
2. Connect the engine wiring harness electrical
connector (4) to the ECT sensor.
Engine Electrical Devices:
CAUTION
1C-9