1D-300 Engine Mechanical:
6. Install a NEW primary camshaft drive chain
tensioner gasket to the primary camshaft drive chain
tensioner.
7. Install the primary camshaft drive chain tensioner
bolts through the primary camshaft drive chain
tensioner and gasket.
8. Ensure the primary camshaft drive chain tensioner
mounting surface on the engine block does not have
any burrs or defects that would degrade the sealing
of the NEW primary camshaft drive chain tensioner
gasket.
9. Place the primary camshaft drive chain tensioner
into position and loosely install the bolts to the block.
CAUTION
!
Refer to "Fastener Notice: ".
10. Verify the proper placement of the primary camshaft
drive chain tensioner gasket tab (1).
a. First Pass
Tightening torque
Tighten the primary camshaft drive chain
tensioner bolts to 5 N⋅m (44 lb in).
b. Final Pass
Tightening torque
Tighten the primary camshaft drive chain
tensioner bolts to 23 N⋅m (17 lb ft).
11. Release the primary camshaft drive chain tensioner
by pulling out the EN 46112 and unlocking the
tensioner plunger.