Table of Contents
Advertisement
Tapered Pipe Thread Repair
The thread repair insert for tapered pipe threads is
coated with a clear silver zinc coating.
WARNING
!
Refer to "Safety Glasses Caution: ".
NOTE
The use of a cutting type fluid GM P/N
1052864, (Canadian P/N 992881), WD 40® or
equivalent is recommended when performing
the drilling, counterboring and tapping
procedures.
When installed to the proper depth, the flange (1) of the
insert will be seated against surface (2) of the base
material of the drilled/tapped hole.
NOTE
• During the drilling process, it is necessary
to repeatedly remove the drill and clean
chips from the hole and the flutes of the
drill.
• Drill the hole until the stop collar contacts
the surface of the base material.
1. Drill out the threads of the damaged hole.
NOTE
All chips must be removed from the drilled
hole prior to tapping.
2. Using compressed air, clean out any chips.
Engine Mechanical:
1D-231
Advertisement
Table of Contents
Troubleshooting
