Suzuki XL7 2007 Service Manual page 979

2. Install a NEW crankshaft position (CKP) sensor O-
ring.
3. Install the CKP sensor.
CAUTION
!
Refer to "Fastener Notice: ".
4. Install the CKP sensor bolt.
Tightening torque
Tighten the CKP sensor bolt to 10 N⋅m (89 lb in).
5. Install the right knock sensor.
6. Install the right knock sensor bolt. Ensure the knock
sensor is oriented with the harness connector
positioned to the front on the right side (1).
Tightening torque
Tighten the right knock sensor bolt to 23 N⋅m (17
lb ft).
Exhaust System: 1K-30