Suzuki XL7 2007 Service Manual page 1049

Trailing Arm Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to "Lifting and
Jacking the Vehicle: ".
2. Remove the tire and wheel. Refer to "Tire and Wheel
Removal and Installation: ".
3. Remove the park brake cable bolt from the trailing
arm and from the frame. Refer to "Parking Brake
Rear Cable Replacement: ".
4. Remove the trailing arm bracket to body bolts. Refer
to "Trailing Arm Bracket Replacement".
5. Remove the trailing arm bushing to bracket nut and
bolt.
6. Remove the trailing arm to knuckle bolts 1.
7. Remove the trailing arm.
Installation Procedure
1. Position the trailing arm to the vehicle.
CAUTION
!
Refer to "Fastener Notice: ".
2. Install the trailing arm to knuckle bolts 1.
Tightening torque
Tighten the bolts to 110 N⋅m (81 lb ft).
3. Position the trailing arm bracket to the trailing arm.
4. Loosely install the trailing arm bushing to bracket nut
and bolt.
5. Install the trail arm bracket. Refer to "Trailing Arm
Bracket Replacement".
6. Tighten the trailing arm bushing to bracket nut and
bolt.
Tightening torque
Tighten the bolt to 160 N⋅m (118 lb ft).
Rear Suspension: 2C-22