ABB i-bus
KNX
Commissioning
Enable further scenes
Options:
•
yes: The parameter window A: Scenes 7...12 is enabled.
3.2.5.3
Parameter window A: Scenes 7...12
3.2.5.4
Parameter window A: Scenes 13...18
The functions and setting options of parameter window A: Scenes 7...12 and A: Scenes 13...18 do not dif-
ferentiate from those of parameter window A: Scenes 1...6. Further scenes are simply enabled.
The descriptions of the parameter setting options can be found in the parameter window
page 66.
Standard value
Options:
ON
OFF
By storing a scene, the user has the opportunity to change the programmed value stored in the
ETS. After a bus voltage failure, the value saved via the KNX is retained.
Note
When a scene is recalled:
•
the function Time is restarted.
•
the logical connections are re-evaluated.
For further information see: Communication objects
code table (8
bit), page 144
no
yes
Output
A, page 107,
Function
SE/S 3.16.1 | 2CDC 505 084 D0203 67
Scene, page 132 and
Scene
A: Scenes
1...6,