ABB i-bus
KNX
Commissioning
Enable function "logic"
Options:
•
no: The parameter window A: Logic for output A is not enabled.
•
yes: The parameter window A: Logic for output A is enabled.
Enable function priority and
safety operation
Options:
•
no: The parameter window A: Safety for output A is not enabled.
•
yes: The parameter window A: Safety for output A is enabled. In this parameter window, the safety
priorities 1, 2, 3 and forced operation are parameterized.
Enable function metering
Options:
•
no: The parameter window A: Metering (Wh) for output A is not enabled.
•
yes: The parameter window A: Metering (Wh) for output A and the corresponding communication ob-
jects are enabled.
Enable function instrument
and power values
Options:
•
no: The parameter window A: Instrument and power values for output A is not enabled.
•
yes: The parameter window A: Instrument and power values for output A and the corresponding
communication objects are enabled.
Enable function load control slave
Options:
•
no: The parameter window A: Load control slave for output A is not enabled.
•
yes: The parameter window A: Load control slave for output A and the corresponding communication
objects are enabled.
no
yes
no
yes
no
yes
no
yes
no
yes
SE/S 3.16.1 | 2CDC 505 084 D0203 57