Lamp Load Output - ABB i-bus KNX Product Manual


ABB i-bus KNX
Device technology
2.1.2

Lamp load output

Lamps
Fluorescent lamps T5 / T8
Low-voltage halogen lamps
Halogen lamps 230 V
Dulux lamps
Marcury-vapour lamps
Switching performance (switching contact)
Number of electronic ballasts (T5/T8, single
1)
element)
1)
For multiple element lamps or other types, the number of electronic ballasts must be determined using the peak inrush current of the electronic
ballasts, see Ballast calculation, page 14.
2)
The number of ballasts is limited by the protection with B16 circuit-breakers
Device designation
SE/S 3.16.1
* ... = current version number of the application program.
Note
The ETS and the current version of the device application program are required for programming.
The current application program can be found with the respective software information for download on
the internet at www.abb.com/knx. After import in the ETS it is available in the ETS under
ABB/Output/Energy actuator.
The device does not support the locking function of a KNX device in the ETS. If you inhibit access to all
devices of the project with a BCU code, this has no effect on this device. It can still be read and pro-
grammed.
Incandescent lamp load
Uncorrected
Parallel compensated
DUO circuit
Inductive transformer
Electronic transformer
Uncorrected
Parallel compensated
Uncorrected
Parallel compensated
Maximum peak inrush-current I
Maximum peak inrush-current I
Maximum peak inrush-current I
18 W (ABB EVG 1 x 18 SF)
24 W (ABB EVG-T5 1 x 24 CY)
36 W (ABB EVG 1 x 36 CF)
58 W (ABB EVG 1 x 58 CF)
80 W (Helvar EL 1 x 80 SC)
Application program Maximum number of
communication objects
Switch Measure 3f/...* 183
3680 W
3680 W
2500 W
3680 W
2000 W
2500 W
3680 W
3680 W
3000 W
3680 W
3680 W
(150 µs)
600 A
p
(250 µs)
480 A
p
(600 µs)
300 A
p
2)
26
2)
26
22
2)
12
2)
10
Maximum number of
group addresses
254
SE/S 3.16.1 | 2CDC 505 084 D0203 9
Maximum number of
associations
254