ABB i-bus
KNX
Commissioning
Object "Deactivate load control" (master)
at recovery of bus voltage
Options:
This parameter defines how the function Load control master should behave after bus voltage recovery.
•
unchanged: The status of the function Load control master is saved at bus voltage failure and restored
after bus voltage recovery.
•
0 = load control activated: The function Load control master is active after bus voltage recovery.
•
1 = load control deactivated: The function Load control master is not active after bus voltage recovery.
50 2CDC 505 084 D0203 | SE/S 3.16.1
unchanged
0 = load control activated
1 = load control deactivated