ABB i-bus
KNX
Commissioning
3.1.1
Conversion
For ABB i-bus
group addresses from earlier application program versions.
Furthermore, conversion can be applied to transfer the existing parameterization of a device to another
device.
Note
When the term "channels" is used in the ETS, inputs and/or outputs are meant. In order to ensure that
the ETS language generally applies for as many ABB i-bus
used here.
®
KNX devices from ETS3 or higher, it is possible to assume the parameter settings and
®
devices as possible, the word „channels" is
SE/S 3.16.1 | 2CDC 505 084 D0203 23