Procedure - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.1.1.1

Procedure

•
Insert the required device into the project.
•
Import the current application program into the ETS.
•
Perform parameterization and program the device.
•
After you have programmed a device, you can transfer the settings to a second device.
•
Right click on the product and select Plug-in > Convert in the context menu for this purpose.
•
Thereafter undertake the required settings in the Convert dialog.
•
Finally, exchange the physical address and delete the old device.
Should you wish to only copy individual channels within a device, use the function
page 25.
24 2CDC 505 084 D0203 | SE/S 3.16.1
Copy and exchange,