Parameter Window General - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
3.2.1 Parameter window
General
© 2008 ABB STOTZ-KONTAKT GmbH
Commissioning
In this parameter window all main parameter settings are undertaken.
Parameter settings
Options: channel setting global (together)
channel setting individual
For every output an individual setting can be undertaken separately for every
output. Particularly in large KNX systems, it is frequently the case that all
outputs must be assigned with the same parameters. For this all settings
only need to be made once in the device. These settings apply for all
outputs.
•
channel setting global (together): The parameter window A-X:
appears (with the 2-fold LR/S X = B and with the 4-fold LR/S X = D),
which applies for all outputs in the same manner.
•
channel setting individual: All parameter windows for every individual
output appear.
Note
With a change from individual to common programming of the parameters,
the settings and object allocations already implemented are not accepted.
Sending and switching delay after bus
voltage recovery in s [2...255]
Options: 2...255 s
Only telegrams are received during the send and switching delay.
However, the telegrams are not processed. The outputs remain unchanged.
No telegrams are sent on the bus.
After the sending and switching delay, telegrams are sent and
the states of the outputs are set to correspond to the parameterisation
or the communication object values.
27