Enhanced Settings; Table 7-18 Recommended Lift Settings For Cable Lengths - Honeywell ACUIX User Manual

Enhanced Settings

Document 800-01023 Rev A
02/08
Select 7 in the Main menu to access the
Enhanced Features menu.
Video Gain/PWM Settings
Select 1 in the Enhanced Features menu to
access the Video Gain/PWM Settings Menu.
Video Gain (UTP)
Select 1 to toggle the Video Gain (UTP) OFF
(default) or ON. This feature is for use in
setting the cabling distances when running
the video on unshielded twisted pair (UTP)
wiring. Turn this feature on to adjust the Lift
and Gain levels of the video.
Lift PWM Level 0–100
If the Video Gain (UTP) is turned ON, the Lift PWM (Pulse Width Modulation) Level can be
adjusted. The Lift setting boosts the high frequency in the video to compensate for high
frequency losses caused by capacitive roll-off of the cable distance. The longer the distance
of UTP wiring, the higher the setting.
1. Select 2 to change the current setting.
2. Enter the desired setting, between 0–100.
Table 7-18 Recommended Lift Settings for Cable Lengths
Cable Length
1200+ ft (365+ m)
900 ft (275 m)
600 ft (183 m)
300 ft (91 m)
3. Press Enter.
ACUIX High Speed Dome User Manual
ENHANCED FEATURES
1 Video Gain/PWM Settings
2 Display Temperature ... OFF
3 Temp. Format ... FAHRENHEIT
4 Display Pressure ...... OFF
5 Time & Date Settings
5 Display Supply Voltages
ESC to Exit
VIDEO GAIN/PWM SETTINGS MENU
1 Video Gain (UTP) ....... OFF
2 Lift PWM Level 0-100 .... NA
3 Gain PWM Level 0-100 .... NA
4 Char White Level 0-100 .. 50
ESC to Exit
Lift Setting
100
80
40
25
123