Preset Tours; Mimic Tours - Honeywell ACUIX User Manual

Operation and Programming with Honeywell Diamond Protocol

Preset Tours

Mimic Tours

58
Recall Preset
For example, to seek Preset 1:
1. Press key 1.
2. Press Preset. The camera moves at the maximum speed to the previously defined
Preset 1.
Presets 1 to 4 can also be selected by a single key press using the keys labelled Preset
1 to 4.
If a recall of an undefined preset number is attempted, the dome will not move and the
message 'Does Not Exist' displays on the screen.
Preset tours function the same when using the HJZTP controller as described by
Tours, page 43, however, the on-screen menus may be accessed differently when using
the HJZTP controller.
Note See Program a Preset Tour (Honeywell VCL and Supported 3rd Party
Protocols), page 117, in
information on setting up Mimic Tours. For more information on using the
HJZTP controller with the ACUIX on-screen menu, see
Controller, page
Mimic tours function the same when using the HJZTP controller as described by
Tours, page 47, however, the on-screen menus may be accessed differently when using
the HJZTP controller.
Note See Mimic Tour (Honeywell Diamond Protocol
On-Screen Setup Menus
more information on using the HJZTP controller with the ACUIX on-screen
menu, see HJZTP Joystick
Manual (900.0570).
Chapter 7, On-Screen Setup Menus
84 and the HJZTP/HJZTP User Manual (900.0570).
for more information on setting up Mimic Tours. For
Controller, page
for more
HJZTP Joystick
Only), page 116, in Chapter 7,
84 and the HJZTP/HJZTP User
Preset
Mimic