Hjtzp Controller; Power Up; Reset Acuix; Manual Control - Honeywell ACUIX User Manual

Operation and Programming with Honeywell Diamond Protocol

HJTZP Controller

Power Up

Reset ACUIX

Manual Control

54
Press + or - until P displays on the controller LCD and press Character Select.
6.
7. Enter the new password, as done in
8. Re-enter the new password for verification. If you enter a different password the
second time, an Invalid message displays and you must start again.
9. After programming the password, you can program a Privacy Zone or press
Clear/Manual twice to exit programming.
Note If the password has been forgotten, the ACUIX can be reset to the default
password through the on-screen setup menus. See
Password (Diamond or IntelliBus
Password Feature.
For detailed information on the HJZTP controller see the
Manual (900.0570).
The operation of the ACUIX upon power up is the same as described on
Press and hold Fn, then press F6 (menu), to send the return to manual (ESC) command.
This command cancels automatic dome actions such as preset tours and alarm actions.
Manual control of the ACUIX when using VCL protocol with the HJZTP controller is the
same as described in Chapter 3, Operation and Programming with Honeywell Diamond
Protocol.
step 5.
Resetting Privacy Zone
Protocols), page 81, in
HJZTP-US/HJZTP-EU User
Chapter 6, ACUIX
page 29.