Operation and Programming with Honeywell VCL Protocol
Flashback Operation—Preset 96
NightShot Mode—Preset 94
Find Home
Presets
64
The flashback function described in
accomplished using Preset 96.
If the ACUIX has a day/night camera with an IR block filter it can be controlled manually
through the setup menus (Preset 90) or directly by sending the ACUIX to Preset 94. A
message, NightShot On or NightShot Off, displays on the video when the ACUIX
executes Preset 94.
The operator can only send the ACUIX to its home position by resetting the scan and
camera. See
Reset ACUIX
When using VCL protocol, there are several Presets reserved for controlling and
programming the ACUIX. Refer to
and their functions. In VCL protocol mode, the ACUIX supports 128 Presets (0–127).
Presets 71–99 are reserved for special functions.
Flashback Operation
on page
62
for more information on finding home.
Table 4-2
for a listing of the pre-programmed Presets
on page
35
can be