Honeywell ACUIX User Manual page 45

Document 800-01023 Rev A
02/08
List Programmed Preset Tours
A list of the programmed Preset Tours can be viewed for each ACUIX. The list displays the
Preset Tour numbers and titles. The Preset Tours cannot be edited from this display.
1. Press Dome Menu.
Press + or - until VectorScan Menu displays on the LCD and press Enter.
2.
Press + or - until List displays on the LCD and press Enter.
3.
The Preset Tour (VectorScan) list, including Preset Tour numbers and titles, displays
on the monitor (where the video from the ACUIX can be viewed).
The controller LCD display shows the command Page Down. Press Enter to view
more pages of the listing (if applicable). When you have reached the end of the listing,
End of Directory displays on the monitor. To go back to the first page of the
listing, press Enter.
4. When you are finished viewing the Preset Tour listing, press Clear/Manual.
5. To exit the menu on the LCD controller, press Dome Menu or press Menu ESC.
List Contents of a Preset Tour
The contents of each Preset Tour stored in the ACUIX can be viewed. The Preset Tour
contents cannot be edited from this display. The list displays the Presets with the
programmed velocity settings and dwell times in the order they were programmed.
1. Press Dome Menu.
Press + or - until VectorScan Menu displays on the LCD and press Enter.
2.
Press + or - until Vscan Contents displays on the LCD and press Enter.
3.
4. Enter the Preset Tour (VectorScan) number (1–16) you want to view.
The contents of the selected Preset Tour displays on the monitor where the ACUIX
video is viewed.
Use the up and down keys to scroll up and down through the contents.
5. When you are finished viewing the Preset Tour contents, press Enter.
6. To exit the menu on the LCD controller, press Dome Menu or press Menu ESC until
the LCD display is cleared of all menus.
Run Preset Tour Once
Perform the following procedure to run a Preset Tour once:
1. Press Dome Menu.
Press + or - until VectorScan Menu displays on the LCD and press Enter.
2.
Press + or - until Run Once displays on the LCD and press Enter.
3.
4. Enter the Preset Tour (VectorScan) number (1–16) using the numeric keys.
ACUIX High Speed Dome User Manual
45