Resetting Privacy Zone Password (Diamond Or Intellibus Protocols) - Honeywell ACUIX User Manual

Resetting Privacy Zone Password (Diamond or IntelliBus
Protocols)
Document 800-01023 Rev A
02/08
6. When the desired PIN number displays,
press Iris Open.
7. Re-enter the PIN as in steps 4–6
above.
If you enter the wrong 4-digit number, the message Invalid PIN, try
Note
again displays and the ACUIX returns to the Enter PIN screen.
Press Iris Open. The message PIN
8.
changed displays briefly and the
display returns to the PASSWORD
SETTINGS menu.
9. Perform another option or press Iris
Close to exit and return to normal
operation.
1. Send the ACUIX to Preset 75.
2. Enter the Supervisory 4-digit PIN
(default = 1000). Move the joystick up
or down to select numbers for each
digit. Move the joystick left or right to
move between digits.
3. Press Iris Open.
Move the joystick down to position the cursor on 3 Reset Privacyzone
4.
Password. The password is reset to the factory default password (blank). To enter
a blank password, press Enter at the password prompt.
ACUIX High Speed Dome User Manual
Re-enter PIN Verify ----
PIN changed.
Enter 4-digit PIN ----
IRIS CLOSE to Exit
81