Table of Contents
Advertisement
Chapter 5 System Configuration
5.1 Storage Settings
Before you start:
To configure record settings, make sure that you have the network storage device within the
network or the memory card inserted in the Explosion-Proof PTZ Camera.
5.1.1 Configuring Recording Schedule
Purpose:
There are two kinds of recording for the Explosion-Proof PTZ Camera: manual recording and
scheduled recording. In this section, you can follow the instructions to configure the scheduled
recording. By default, the record files of scheduled recording are stored in the memory card (if
supported) or in the network disk.
Steps:
1. Enter the Record Schedule settings interface:
Configuration > Storage > Schedule Settings > Record Schedule
Figure 5-1 Recording Schedule Interface
2. Check the checkbox of Enable to enable scheduled recording.
3. To set the advanced settings of the Explosion-Proof PTZ Camera, click
to enter
the advanced settings interface.
Advertisement
Table of Contents
