Logging On; Changing The 4-Digit Pin; Table 6-1 Default User Pins - Honeywell ACUIX User Manual

ACUIX Password Feature

Logging On

Changing the 4-Digit PIN

80
If the password feature is enabled, and the
user tries to access the ACUIX on-screen
setup menus, the Login Screen displays.
1. Enter the user's 4-digit PIN. Move the
joystick up or down to select numbers
for each digit. Move the joystick left or
right to move between digits.
2. Press Iris Open to accept the
password and log in to the ACUIX.
3. Press Iris Close to exit the login screen without logging in.
Table 6-1 Default User PINs
User
0 (Supervisor)
Once a user enters a valid 4-digit PIN, the user can access the ACUIX setup menus.
1. Send the ACUIX to Preset 75.
2. Enter the Supervisory 4-digit PIN
(default = 1000). Move the joystick up
or down to select numbers for each
digit. Move the joystick left or right to
move between digits.
3. Press Iris Open.
4. Move the joystick down to position the
cursor on 2 Change PIN and press
Iris Open.
5. Move the joystick up or down to select
the numbers for each digit. Move the
joystick left or right to move between
digits.
Login to ACUIX
Enter 4-digit PIN .. ----
IRIS CLOSE to Exit
PIN
1000
Enter 4-digit PIN ----
IRIS CLOSE to Exit
Enter 4-digit PIN ----