Table 3-5 Program Preset Menu Commands - Honeywell ACUIX User Manual

Document 800-01023 Rev A
02/08
4. Press 5.
5. Press Enter.
The current scene is saved as Preset 5 with the title PS5.
Program Preset Method 2 (User-defined Title)
1. Press Dome Menu.
Press + or - until PreShot Menu displays.
2.
3. Press Enter.
Press + or - until Program displays.
4.
5. Press Enter. The following displays in the
controller's LCD window.
6. Follow the on-screen prompts that appear
on the monitor where the ACUIX video is
viewed.
a. Enter the Preset number (see
keypad and press Enter. If the selected Preset number has already been
programmed, the Preset title displays. To accept the existing title, press Enter. To
change the current title proceed to step b.
Note The HEGS5000 is limited to Preset numbers 0–99.
Note Preset 99 is reserved for controlling the NightShot mode if this feature is
available on the camera and cannot be programmed. For domes without the
NightShot feature, Preset 99 can be programmed.
Press + or - until the desired character displays on the controller's LCD screen,
b.
and press Character Select. The controller sends the character to the ACUIX.
Continue selecting characters and pressing Character Select until the desired
title displays on the monitor.
c. Press Enter. The following commands are displayed on the monitor:
Table 3-5 Program Preset Menu Commands
Action Required Steps
Press + or - until C displays on the LCD and press Character
C to Change name
location Select. Use the up or down arrow keys to reposition the Preset
title on the monitor screen.
Press + or - until E displays on the LCD and press Character
E to Edit Preset
Select. Reposition the PTZ and/or change the lens settings,
then repeat step 6.
Press + or - until D displays on the LCD and press Character
D to Delete Preset
Select. The Preset number entered in step 6 is deleted.
ACUIX High Speed Dome User Manual
< Select Function
Table 3-4 for reserved Presets) using the numeric
>
A
39