Digital Zoom Message - Honeywell ACUIX User Manual

On-Screen Setup Menus
90
Sectors
Select 2 from the Display Options menu to toggle the Sector titles ON (default) or OFF. The
sector title is programmed by the user when programming a sector.
Preset Names
Select 3 from the Display Options menu to toggle the Preset names ON (default) or OFF. If
set to ON, the Preset title is added to the video signal when the ACUIX dome is sent to the
Preset. The title displays at the top of the monitor. If using Standard protocol, the Preset
name location can be changed when programming the Preset. See
38, in Chapter 3, Operation and Programming with Honeywell Diamond
OFF, the ACUIX dome goes to the Preset, but the title is not added to the video signal.

Digital Zoom Message

Select 4 from the Display Options menu to display the actual digital zoom magnification.
Selecting 4 toggles the value between ON and OFF (default). If set to ON, the digital zoom
setting displays on the right side of the monitor on the same line as the camera ID display.
If the camera name location is changed, the digital zoom setting display location is also
changed.
Start-up Screen Message
Select 5 from the Display Options menu to turn the start-up screen display ON (default) or
OFF.
If the start-up screen display is set to ON, the ACUIX displays the standard screens when
the unit is powered down and back up.
Program
Protocol. If set to
---- ACUIX Dome ----
Protocol ..... Diamond
9600 baud no parity-8bits
Camera ......... Model
Honeywell Video Systems
DOMEApp date version B0
FPGABit date version B1
Please wait......8
CAM-0006 M
Preset, page