Using The Live View Interface; Video Encoder Settings; Figure 3-4 Live View Interface; Figure 3-5 Video Encoder Settings - Honeywell Performance Series User Manual

Performance Series IP Camera Software Configuration Guide

Using the Live View Interface

The Live View window has four areas with controls and options for monitoring live video.

Figure 3-4 Live View Interface

1. Video encoder settings area (see
2. System menus (see
3. Live View controls toolbar (see
4. Live View interface settings toolbar (see

Video Encoder Settings

In the video encoder settings area of the Live View interface, you can choose a stream and set
the stream protocol.

Figure 3-5 Video Encoder Settings

Table 3-1 Video Encoder Settings

Setting
Main Stream
Sub Stream 1
Sub Stream 2
12
Video Encoder Settings, page
System Menus, page 13)
Live View Controls, page 13)
Live View Window Configuration, page
Description
Delivers high definition video for real-time monitoring,
recording, and storage. Uses the most bandwidth.
Delivers low/standard definition video, typically for remote
monitoring in lower network bandwidth environments.
Delivers low, standard, or high definition video.
12)
14)