Table 7-12 Still Preset Operation - Honeywell ACUIX User Manual

Document 800-01023 Rev A
02/08
NTSC cameras = 1/4 sec, 1/8 sec, 1/15 sec, 1/30 sec, or 1/60 sec
The Low Light level mode cannot be set higher than the High Light level mode.
Manual White Balance
Select 5 to choose between ON and OFF for Manual White Balance control.
If Manual White Balance is ON, menu
options 1–4 do not apply and change to
NA, while menu options 6 and 7 become
available.
Red Gain
Select 6 to set the Red Gain. The Red
Gain option is only available if Manual
White Balance is ON. Enter a value
between 0 (low) and 255 (high) and
select Enter. The default value is 200.
Blue Gain
Select 7 to set the Blue Gain. The Blue Gain option is only available if Manual White
Balance is ON. Enter a value between 0 (low) and 255 (high) and select Enter. The default
value is 200.
Still Preset
Select 5 to toggle Still Preset ON or OFF (default).
Table 7-12 Still Preset Operation
If:
Still Preset is on (video is
frozen)
Still Preset is off (video is
unfrozen)
ACUIX High Speed Dome User Manual
WHITE BALANCE CONTROL
1 High Light WB Mode ..... NA
2 Low Light WB Mode ...... NA
3 Enter High Light ....... NA
4 Enter Low Light ........ NA
5 Manual White Balance ... ON
6 Red Gain .............. 200
7 Blue Gain ............. 200
ESC to Exit
Then:
Video is frozen between Presets. The video remains
at the current Preset until the ACUIX arrives at the
next Preset, and then switches the video. An asterisk
displays to the left of the camera ID when the ACUIX
is moving between Presets. If an operator manually
controls the ACUIX, the Still Preset function is
disabled until the ACUIX is sent to another Preset.
Video returns to normal operation.
109