Motion Detection - Honeywell ACUIX User Manual

Document 800-01023 Rev A
02/08
Image Stabilization
1. Select 8 to toggle the Image
Stabilization feature ON or OFF
(default). If you select ON, the motion
detection feature is disabled.
Select 5Hz or 10Hz to turn Image
a.
Stabilization on.
Select OFF to turn Image
b.
Stabilization off.
Note Selecting OFF disables motion detection.
2. Press ESC to return to the Camera Options menu and leave Image Stabilization off.
When Electronic Image Stabilization (EIS) is enabled, the camera reduces the area of the
CCD that is scanned. This causes the video displayed on the monitor to appear to have
zoomed in. When the dome undergoes a pan or tilt operation, electronic Image
Stabilization is disabled while the camera moves, and then re-enables after the camera
has stopped moving for a five second period.
Note When Image Stabilization is enabled, the Digital Zoom is limited to 2x.

Motion Detection

1. Select 9 to turn Motion Detection ON
or OFF (disabled). If Motion Detection
is ON, Interlace Scanning and Image
Stabilization are automatically
disabled. If Motion Detection is
enabled, the default function is also
disabled.
Note If Motion Detection is enabled and an operator sends a command to the
ACUIX, Motion Detection is automatically disabled and the operator must
access the setup menu to re-enable it.
ACUIX High Speed Dome User Manual
This will Disable
Motion Detection.
Are you sure that you
want to do this?
-Y/N-
ESC to Exit
This will Disable
Interlace Scanning
and Image Stabilization.
Are you sure that you
want to do this?
-Y/N-
PTZ will disable this option.
ESC to Exit
115